Request: Marlin profile for AM8

Step by step help for new users installing Marlin for the first time
Post Reply
punk attack
Posts: 1
Joined: Mon Feb 05, 2018 4:54 am

Request: Marlin profile for AM8

Post: # 508Post punk attack
Fri Feb 16, 2018 2:56 pm

Is there someone with am8 config profile? I upgrade the frame but I still use the stock firmware..



freddan_6
Posts: 20
Joined: Tue Feb 06, 2018 2:41 pm

Re: Request: Marlin profile for AM8

Post: # 747Post freddan_6
Tue Mar 13, 2018 8:23 am

It is very indiviudual what you can use.
I have a bowden clone that is slow, max 20mm/s retraction speed.

I am using these settings, I am getting some artifacts on one side of my prints, so it could be on the fast side.

#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 410, 469 } // Was 100,100,400,100, changed to first to 310 Bowden!!!
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 20 } // slow bowden
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.3
#define DEFAULT_EJERK 5.0

Post Reply