MOSFET

Adding Go Faster Stripes to your 3D Printer
Post Reply
dbm
Posts: 2
Joined: Tue Feb 06, 2018 11:07 pm

MOSFET

Post: # 339Post dbm
Tue Feb 06, 2018 11:10 pm

I'm looking to add a MOSFET for my heated bed, and possibly the hot end down the line. I'd like to build my own board though. Does anyone know what MOSFET part number is most commonly used for the boards?



freddan_6
Posts: 20
Joined: Tue Feb 06, 2018 2:41 pm

Re: MOSFET

Post: # 354Post freddan_6
Wed Feb 07, 2018 5:42 pm

The most common on my printer is HA210NO6.
Not sure it is most common though. The MOSFET on the motherboard are adequate, the connectors are not. Make sure you go for good connectors for the MOSFET. If possible i suggest XT60.

dbm
Posts: 2
Joined: Tue Feb 06, 2018 11:07 pm

Re: MOSFET

Post: # 360Post dbm
Thu Feb 08, 2018 12:05 am

Appreciate the info! Yeah I plan on using that quality of connector.

Post Reply