Mosfet Control Wire and JST Connectors

Adding Go Faster Stripes to your 3D Printer
Post Reply
JonnyAlpha
Posts: 4
Joined: Tue Feb 06, 2018 6:44 pm

Mosfet Control Wire and JST Connectors

Post: # 332Post JonnyAlpha
Tue Feb 06, 2018 6:51 pm

Hi;

I posted this on the FaceBook Group but then saw that you have now gone live with the Forum.

The control wire that came with my MOSFETs is too short. I need about 30cm.
I have found one seller that sells JST connectors with 30cm cable but before I order can someone confirm the pin size of the JST connectors there appear to be several different sizes?

These are the Mosfets that I bought:
https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1

Thanks



freddan_6
Posts: 20
Joined: Tue Feb 06, 2018 2:41 pm

Re: Mosfet Control Wire and JST Connectors

Post: # 355Post freddan_6
Wed Feb 07, 2018 5:46 pm

I think the connector is the same as I got, but it is half hidden behind the heatsink so I am not 100% sure. Anyway my connector is JST-XH with 2.5mm pitch.

JonnyAlpha
Posts: 4
Joined: Tue Feb 06, 2018 6:44 pm

Re: Mosfet Control Wire and JST Connectors

Post: # 369Post JonnyAlpha
Thu Feb 08, 2018 10:11 am

Thanks freddan_6

Just ordered these, 2.54mm pitch so just hope they fit :-)

Post Reply